Smart Vision Lights RM140 Mini Ring Light

RM140 Mini Ring LightsProduct Details

• Built-in Driver - No External Wiring To A Driver Needed
• 6" (15 cm) - 5 Pin M12 Quick Connect Cable
• Over-Current Protection
• PNP and NPN Strobe Input
• Continuous Operation or Strobe Mode
• High Output LEDs
• Available in SWIR wavelengths

MINI RING LIGHT OVERVIEW
Smart Vision Lights most compact ring lights are the RM75 and RM140 mini LED ring lights. These mini LED ring lights features our built-in Multi-Drive™ controller allowing users to operate the mini ring light continuously or in OverDrive™ Strobe mode. Our mini LED ring lights are extremely bright and available in multiple wavelengths to meet your application needs. All mini LED ring lights feature a standard 5-pin M12 connector makes wiring simple. The 1–10 V analog control line gives the user total control over intensity. The built-in Multi-Driver™ also protects the LEDs from premature degradation and failure caused by excessive heat by regulating the current delivered to the LEDs and limiting the duty cycle of the light.

RM140 LIGHT OVERVIEW
The RM140 is larger in diameter than the RM75. The RM140 also includes our built-in driver, which features Multi-Drive, allowing the user to operate the light in constant ON operation or Multi-Drive™ depending on wiring method. The industry standard 5 Pin M12 connector makes for simple wiring. The 1-10V analog control line gives the user total control over intensity in the continuous mode. The user simply sets the product parameters to the maximum allowed intensity (see datasheet). Removing the signal will put the light into OverDrive™ mode.

Recommended illumination usage: Dark Field, Radial Wavelength

Wavelength Colors

Multi-Drive Wiring
Wiring Configuration for CONSTANT ON Operation
Wiring Configuration for STROBE/PULSE Operation
MOUNTING USING ADP0002-KIT MOUNTING BRACKET
The RM140 and RMX140 lights may be mounted using the ADP0002-KIT mounting plate and optional thread adapters. To mount with this method, the ADP0002-KIT mounting bracket must be purchased. The ADP0002-KIT bolts to the rear of the light and has an M46 thread in its center. A Step Up or Step Down thread adapter must then be purchased to adapt your lens or camera to this M46 Thread. Please reference the datasheet for your light or camera in order to determine the appropriate thread adapter to purchase.MOUNTING USING T-NUTS
Mounting options include four (4) T-slots & four (4) M4 threaded holes.
Hardware included:
(2) M4x16 screws
(2) M4 nylon nuts

RM140 ACCESSORIES